Braskem is a leading global polyisobutylene manufacturer with a strong reputation for product quality, reliability, and large-scale production capacity. With decades of experience in petrochemicals and specialty polymers, Braskem serves customers worldwide with high-performance PIB solutions for demanding industrial applications. As Braskem’s distribution partner, De Monchy International provides access to a trusted portfolio of polyisobutylene products supported by proven manufacturing expertise and a commitment to sustainable development.
Polyisobutylene (PIB) is widely used in the rubber and tire industry due to its exceptional air retention, flexibility, and resistance to moisture and oxidation. These properties make PIB an important material in applications where long-term durability and sealing performance are critical.
A key application of PIB is in butyl rubber production, where isobutylene serves as the primary building block. Butyl rubber is commonly used in tire inner liners because of its low gas permeability, helping tires maintain air pressure over extended periods. This contributes to improved tire performance, safety, and service life.
Beyond tire manufacturing, PIB is also used in rubber-based sealants, gaskets, cable compounds, vibration-dampening materials, and protective coatings. Its combination of elasticity, chemical stability, and weather resistance makes it a valuable additive in demanding industrial and automotive applications.
Polyisobutylene (PIB) is available in a range of molecular weights, each offering distinct performance characteristics. In general, lower molecular weight grades provide lower viscosity and are often used in lubricant and fuel additive applications, while higher molecular weight grades deliver increased viscosity, tackiness, elasticity, and sealing performance. By selecting the appropriate molecular weight, manufacturers can optimize PIB for applications ranging from lubricant additives and adhesives to sealants and rubber compounds. Conventional PIB grades are available across a broad molecular weight spectrum, enabling tailored performance for specific industrial requirements.
We offer a complete range of PIB grades, including:
Each grade differs in molecular weight and rheological properties, tailored to your specific application. For example:
Not sure which grade suits your formulation? Just ask – we’ll help you make the right choice.
| Grade | Viscosity (100°C) | Average Molecular Weight N | Flash Point |
|---|---|---|---|
| PIB 4 | 37,8°C | 300 | 125°C |
| PIB 24 | 210°C | 940 | 190°C |
| PIB 30 | 630°C | 1200 | 190°C |
As an experienced industrial grade supplier, De Monchy offers comprehensive support for both industrial and specialized manufacturing applications across Europe:
| Property | Value / Comment |
|---|---|
| Chemical structure | Linear polymer, narrow molecular weight distribution (Mw/Mn ~2) |
| Viscosity | Wide range available depending on molecular weight |
| Tg | -60°C – excellent low-temp flexibility |
| Compatibility | Excellent with rubbers, elastomers, polyolefins, aromatics |
| Toxicology | Non-toxic, skin-friendly, FDA-approved |
| Color / Odor | 100% colorless and odorless |
| Barrier properties | Strong resistance to moisture and gases |
Whether you’re looking for PIB 24 for lubricants and greases, PIB 30 for sealants, or just a reliable PIB chemical supplier — we’re ready to support you.
“*” indicates required fields
Conventional PIB and High Reactive PIB (HR-PIB) share many of the same performance characteristics, including excellent chemical stability, oxidation resistance, and low volatility. The main difference lies in their chemical reactivity. HR-PIB contains a higher concentration of reactive terminal double bonds (vinylidene groups), making it particularly suitable for the production of fuel and lubricant additive intermediates. Conventional PIB is primarily selected for applications where physical properties such as viscosity, tackiness, flexibility, and sealing performance are most important
The ideal PIB grade depends on factors such as viscosity requirements, processing conditions, migration rate, tack level, and end-use application. De Monchy’s technical specialists can help you select the most suitable grade for your formulation.
Although the terms are sometimes used interchangeably, polyisobutylene (PIB) and polybutene are different materials. PIB is produced solely from isobutylene monomers, resulting in a highly uniform polymer structure. Polybutene is produced from a mixed C4 stream and contains both isobutylene and n-butene units, leading to different chemical and performance characteristics. For applications requiring controlled reactivity and consistent performance, PIB is often the preferred choice.
PIB is generally compatible with many mineral oils, base oils, and polymer systems. It is commonly blended into lubricant, adhesive, and sealant formulations to enhance viscosity, flexibility, and performance characteristics.
PIB should be stored in a cool, dry environment away from strong oxidizing agents and direct heat sources. Containers should remain properly sealed to prevent contamination and moisture ingress. High-viscosity grades may require heated handling equipment to facilitate transfer and processing.
Yes. PIB is highly resistant to water, oxidation, UV exposure, and many chemicals. These properties contribute to its long service life and make it suitable for demanding industrial environments and sealing applications.